箱体突破。。

是 否 +2 论坛币

k人 参与回答

经管之家送您一份

应届毕业生专属福利!

求职就业群

赵安豆老师微信：zhaoandou666

经管之家联合CDA

送您一个全额奖学金名额~ !

立即领取

感谢您参与论坛问题回答

经管之家送您两个论坛币！

+2 论坛币

想利用缠论定义的高低点来做箱体突破，高低点已经能够找到，但是如何读取三个高点/低点的数据来进行比较？求大神帮助！


G:=MA(C,5);//定义5周期均线
D:=MA(C,10);//定义10周期均线
NNH:=BARSLAST(H=HHV(H,7)) ,NODRAW;//定义上次满足7根K线最高价至今的周期为NNH
NNL:=BARSLAST(L=LLV(L,7)) ,NODRAW;//定义上次满足7根K线最低价至今的周期为HHL
NN:=IF(REF(G,NNH)>REF(D,NNH) AND NNH<=4,NNH,IF(REF(G,NNL)<REF(D,NNL) AND NNL<=4,NNL,5)) ,NODRAW;//定义NN为上次满足NNH至今不大于4根K线同时在NNH前5日均价大于10日均价的取NNH，NNL至今不大于4根均线同时在NNL前5日均线小于10日均线的取NNL，否则取值为5
N:=IF(ISLASTBAR AND NN>0,NN,5) ,NODRAW;//定义N为若该K线为最后一根K线且NN>0，取NN，否则取值5
HH:=REF(H,N)=HHV(H,6);//定义HH为N个周期前的6周期最高值
LL:=REF(L,N)=LLV(L,6);//定义LL为N个周期前的6周期最低值
FG01:BACKSET(HH,N+1)>BACKSET(HH,N),NODRAW;
FD01:BACKSET(LL,N+1)>BACKSET(LL,N) ,NODRAW;
FG02:=FG01=FD01 AND G>D,NODRAW;
FD02:FG01=FD01 AND G<D,NODRAW;
TTTT:BARSLAST(FD01),NODRAW;
FG0:=FG01 AND IF(FG02=1,H=HHV(H,BARSLAST(REF(FD01,1))+1),H=HHV(H,IF(BARSLAST(L=LLV(L,7))>=5,5,BARSLAST(FD01)))) AND FD02=0 ,NODRAW;
FD0:=FD01 AND IF(FD02=1,L=LLV(L,BARSLAST(REF(FG01,1))+1),L=LLV(L,IF(BARSLAST(H=HHV(L,7))>=5,5,BARSLAST(FG01)))) AND FG02=0 ,NODRAW;
//高低点间周期
//高低点间周期
GT:BARSLAST(FG0),NODRAW;
DT:BARSLAST(FD0),NODRAW;
//第一次处理高低点间多余的点
LLLL:DT=0 AND REF(DT,1)<GT AND L>REF(L,REF(DT,1)+1),NODRAW;
FG1:BACKSET(REFX(GT,1)=0 AND GT<DT AND REFX(H,1)>=REF(H,GT),GT+1),NODRAW;
FD1:BACKSET(REFX(DT,1)=0 AND DT<GT AND REFX(L,1)<=REF(L,DT),DT+1),NODRAW;
FG11:IF(GT=0 AND REF(GT,1)<DT AND IF(REF(G,BARSLAST(L=LLV(L,7)))>REF(D,BARSLAST(L=LLV(L,7))),BARSLAST(L=LLV(L,7))<5,1) AND H<REF(H,REF(GT,1)+1),1,0),NODRAW;
FD11:IF(DT=0 AND REF(DT,1)<GT AND IF(REF(G,BARSLAST(H=HHV(H,7)))<REF(D,BARSLAST(H=HHV(H,7))),BARSLAST(H=HHV(H,7))<5,1) AND L>REF(L,REF(DT,1)+1),1,0),NODRAW;
//再次周期
GT1:BARSLAST(FG11<>1 AND FG1<>1 AND FG0),NODRAW;
DT1:BARSLAST(FD11<>1 AND FD1<>1 AND FD0),NODRAW;
FD2:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW;
FG2A:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)<=LLV(L,GT1+5) AND REF(H,GT1)>HHV(H,GT1+5),GT1+1),NODRAW;
FG2B:IF(GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 AND REF(L,DT1)<=LLV(L,REF(GT1,1)+6) AND H>HHV(H,REF(GT1,1)+6),1,0),NODRAW;
FG2:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW;
FD2A:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)>=HHV(L,DT1+5) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;
FD2B:IF(DT1=0 AND GT1<4 AND REF(DT1,1)-GT1<4 AND REF(H,GT1)>=HHV(H,REF(DT1,1)+6) AND L>LLV(L,REF(DT1,1)+6),1,0),NODRAW;
TTTTTT: H<REF(H,REF(GT1,1)+1) AND DT1<4,NODRAW;
HHHHHH:REF(LLV(L,10),DT1),NODRAW;
FG21:IF(GT1=0 AND DT1<4 AND H<=REF(H,REF(GT1,1)+1) ,1,0),NODRAW;
FD21:IF(DT1=0 AND GT1<4 AND L>=REF(L,REF(DT1,1)+1) ,1,0),NODRAW;
FD231:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>REF(LLV(L,10),DT1),DT1+1),NODRAW;
FG23:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND (REF(H,GT1)<REF(HHV(H,13),GT1) OR REF(FD231,DT1)=0),GT1+1),NODRAW;
FG231:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<REF(HHV(H,10),GT1) ,GT1+1),NODRAW;
FD23:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND ( REF(L,DT1)>REF(LLV(L,13),DT1) OR REF(FG231,GT1)=0),DT1+1),NODRAW;
FDD23:REF(H,GT1)<REF(HHV(H,10),GT1) OR REF(FD23,DT1)=0,NODRAW;
FD24:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)<HHV(H,GT1+3) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;
FG24:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)>LLV(L,DT1+3) AND REF(H,GT1)<HHV(H,GT1+5),GT1+1),NODRAW;
GT2:BARSLAST(FG21<>1 AND FG23<>1 AND FG231<>1 AND FG24<>1 AND FG2<>1 AND FG2A<>1 AND FG2B<>1 AND GT1=0),NODRAW;
DT2:BARSLAST(FD21<>1 AND FD23<>1 AND FD231<>1 AND FD24<>1 AND FD2<>1 AND FD2A<>1 AND FD2B<>1 AND DT1=0),NODRAW;
FG3:BACKSET(REFX(GT2,1)=0 AND GT2<DT2 AND REFX(H,1)>=REF(H,GT2),GT2+1),NODRAW;
FD3:BACKSET(REFX(DT2,1)=0 AND DT2<GT2 AND REFX(L,1)<=REF(L,DT2),DT2+1),NODRAW;
FG31:IF(GT2=0 AND REF(GT2,1)<DT2 AND H<REF(H,REF(GT2,1)+1),1,0),NODRAW;
FD31:IF(DT2=0 AND REF(DT2,1)<GT2 AND L>REF(L,REF(DT2,1)+1),1,0),NODRAW;
GT3:BARSLAST(GT2=0 AND FG3<>1 AND FG31<>1 ),NODRAW;
DT3:BARSLAST(DT2=0 AND FD3<>1 AND FD31<>1),NODRAW;
FG4:BACKSET(REFX(GT3,1)=0 AND GT3<DT3 AND REFX(H,1)>=REF(H,GT3),GT3+1),NODRAW;
FD4:BACKSET(REFX(DT3,1)=0 AND DT3<GT3 AND REFX(L,1)<=REF(L,DT3),DT3+1),NODRAW;
FG41:IF(GT3=0 AND REF(GT3,1)<DT3 AND H<REF(H,REF(GT3,1)+1),1,0),NODRAW;
FD41:IF(DT3=0 AND REF(DT3,1)<GT3 AND L>REF(L,REF(DT3,1)+1),1,0),NODRAW;
HHH:=GT3=0 AND FG31<>1 AND FG3<>1,NODRAW;
LLL:=DT3=0 AND FD31<>1 AND FD3<>1,NODRAW;
PARTLINE(FG0 ,H,COLORYELLOW),POINTDOT,LINETHICK2;
PARTLINE(FD0 ,L,COLORGRAY),CIRCLEDOT,LINETHICK2;

扫码加我 拉你入群

请注明：姓名-公司-职位

以便审核进群资格，未注明则拒绝

分享0 收藏0 回帖

关键词：最低价 第一次 最高价