1.4RP载重子午线汽车轮胎优化设计与加工工艺研究_本科毕业论文
发布时间:
2015-03-20
来源:
人大经济论坛
本科毕业论文范文
摘 要
随着公路建设和汽车工业的不断发展,对轮胎使用性能的要求越来越高。原来生产的1.4PR载重汽车轮胎由于花纹结构陈旧,并时有肩空和胎圈磨损等质量问题,已经不能适应市场需求。为此,在对市场调研后,对1.4PR载重子午线轮胎进行了优化设计和加工工艺研究。
本文主要通过对子午线轮胎结构特点的分析,并探讨了轮胎结构与轮胎特性方面的关系,还有轮胎结构参数和车辆特性的关系。然后根据分析的结果对轮胎的带束层,胎圈,胎体和胎冠进行了结构的优化设计。并用三维设计软件进行三维建模。最后对轮胎的加工工艺进行研究,并制作加工工艺卡。
关键字:汽车轮胎 子午线 优化设计 加工工艺
Abstract
With the road construction and automobile industry continues to develop, the tire performance requirements are high. The original truck tire production 1.4PR structure as the old pattern, and when the shoulder and bead wear air quality problems, has been unable to meet market demand. To this end, after market research, we design and processing of the 1.4PR radial truck tire .
In this paper, by analyzing the characteristics of radial tire structure and the structure of the tire and tire properties relationships, as well as tire structure parameters and the relationship between vehicle characteristics. Then the results of the analysis of tire belt, bead, carcass and tire crown The structure of the optimal design. Use three-dimensional design software to do three-dimensional modeling. Finally, to make the tire processing technology research and production of processing card.
Keyword: Car tire Meridian Optimization Fertigungsplanung
目录
第一章 绪论1
1.1汽车轮胎的发展趋势1
1.2子午线轮胎的构造及特性1
1.3课题的提出3
1.4本文完成的工作3
第二章 轮胎的优化设计4
2.1子午线轮胎的结构特点4
2.2轮胎特性与轮胎结构元件的关系5
2.3轮胎的优化设计9
2.3.1带束层的设计9
2.3.2胎圈的设计10
2.3.3胎体的设计12
2.3.4胎冠的设计13
2.4轮胎的优化设计模型13
第三章 轮胎加工生产过程研究15
3.1子午线轮胎制造工艺特点15
3.2子午线轮胎制造工艺流程和工艺条件15
3.2.1制造工艺流程15
3.2.2生产工艺条件15
3.3原材料的混炼工艺16
3.3.1原材料加工16
3.3.2配料的工艺要求16
3.3.3胶料的快速检验17
3.3.4混炼工序17
3.4胎面的加工制造工艺18
3.4.1胎面等部件的制造工艺18
3.4.2胎面部件的制作工艺流程19
3.4.3胎面的压出工艺条件20
总结21
致谢23
附录:24
1轮胎部件加工工艺卡:24
2原材料的混炼加工工艺卡25