后钢板弹簧吊耳加工工艺及夹具设计_机械专业毕业论文-经管之家官网！

免费学术公开课,扫码加入

目 录

摘 要.................................................................Ⅰ
ABSTRACT..............................................................II
目录...................................................................1
1绪 论................................................................1
2 后钢板弹簧吊耳加工工艺规程设计......................................3
2.1零件的分析..........................................................3
2.1.1零件的作用.........................................................3
1.1.2零件的工艺分析.....................................................3
2.2工艺过程设计所应采取的相应措施.......................................4
2.3后钢板弹簧吊耳加工定位基准的选择.....................................4
2.3.1 确定毛坯的制造形式................................................4
2.3.2粗基准的选择.......................................................4
2.3.3精基准的选择......................................................5
2.4 工艺路线的制定.....................................................5
2.4.1 工艺方案一.......................................................5
2.4.2 工艺方案二.......................................................5
2.4.3 工艺方案的比较与分析.............................................6
2.5机械加工余量、工序尺寸及毛坯尺寸的确定...............................6
2.6确定切削用量及基本工时（机动时间）...................................7
2.7时间定额计算及生产安排..............................................16
2.8 本章小结...........................................................18
3 粗铣后钢板弹簧吊耳内侧端面夹具设计.................................19
3.1粗铣后钢板弹簧吊耳内侧端面夹具设计..................................19
3.2定位方案的分析和定位基准的选择.....................................19
3.3定位误差分析.......................................................19
3.4铣削力与夹紧力计算.................................................20
3.5定向键与对刀装置设计...............................................21
3.6夹紧装置及夹具体设计................................................23
3.7夹具设计及操作的简要说明............................................24
3.8本章小结...........................................................24
4 加工工艺孔夹具设计.................................................25
4.1加工工艺孔夹具设计..................................................25
4.2定位方案的分析和定位基准的选择......................................25
4.4切削力的计算与夹紧力分析............................................26
4.5钻套、衬套、钻模板及夹具体设计.....................................26
4.6夹具精度分析........................................................28
4.7夹具设计及操作的简要说明............................................28
4.8本章小结...........................................................29
5 加工工艺孔夹具设计..................................................30
5.1加工工艺孔夹具设计..................................................30
5.2定位方案的分析和定位基准的选择......................................30
5.3定位元件的设计......................................................30
5.4定位误差分析.......................................................32
5.5切削力的计算与夹紧力分析............................................32
5.6钻套、衬套、钻模板及夹具体设计.....................................32
5.7夹具精度分析.......................................................34
5.8夹具设计及操作的简要说明............................................34
5.9本章小结...........................................................35
结 论...............................................................36
参 考 文献...........................................................37
致 谢................................................................38

摘 要
本次设计是对后钢板弹簧吊耳零件的加工工艺规程及一些工序的专用夹具设计。后钢板弹簧吊零件的主要加工表面是平面及孔。由加工工艺原则可知，保证平面的加工精度要比保证孔的加工精度容易。所以本设计遵循先面后孔的原则。并将孔与平面的加工明确划分成粗加工和精加工阶段以保证加工精度。基准选择以后钢板弹簧吊耳大外圆端面作为粗基准，以后钢板弹簧吊耳大外圆端面与两个工艺孔作为精基准。主要加工工序安排是先以后钢板弹簧吊耳大外圆端面互为基准加工出端面，再以端面定位加工出工艺孔。在后续工序中除个别工序外均用端面和工艺孔定位加工其他孔与平面。整个加工过程均选用组合机床。

关键词 后钢板弹簧吊耳，加工工艺，专用夹具

ABSTRACT
The design of the plate after spring lug parts of the processing order of the processes and some special fixture design. Spring plate after hanging parts of the main plane of the surface and pore. By the principle known Processing , the plane guarantee precision machining holes than guarantee the machining precision easy. So the design follows the surface after the first hole principle. Plane with holes and the processing clearly divided into roughing and finishing stages of processing to ensure accuracy. After selecting base plate spring lug large cylindrical face as a rough benchmark, After the leaf spring lug large cylindrical end with two holes as a precision technology benchmarks. main processes arrangements after the first spring plate lug large cylindrical face each other benchmarks machined face, End position to further processing out of holes. In addition to the follow-up processes are individual processes with end-positioning technology and other processing Kong and plane. The entire process of processing machine combinations were selected.

Key words The empress steel plate spring coil mourns the ear,Process the craft,Appropriation tongs

「经管之家」APP：经管人学习、答疑、交友，就上经管之家！
免流量费下载资料----在经管之家app可以下载论坛上的所有资源，并且不额外收取下载高峰期的论坛币。
涵盖所有经管领域的优秀内容----覆盖经济、管理、金融投资、计量统计、数据分析、国贸、财会等专业的学习宝库，各类资料应有尽有。
来自五湖四海的经管达人----已经有上千万的经管人来到这里，你可以找到任何学科方向、有共同话题的朋友。
经管之家（原人大经济论坛），跨越高校的围墙，带你走进经管知识的新世界。
扫描下方二维码下载并注册APP