你好,欢迎来到经管之家 [登录] [注册]

设为首页 | 经管之家首页 | 收藏本站

基于松下PLC的五层电梯控制系统设计_自动化专业论文

发布时间:2015-01-18 来源:人大经济论坛
自动化专业论文范文 目录 摘要I AbstractII 第一章绪论1 1.1 本课题研究的背景及意义1 1.2 本次研究的主要内容2 第二章电梯相关知识3 2.1 曳引式电梯基本结构3 2.2 依照操纵方式的电梯分类6 2.3电梯的控制功能7 第三章 控制系统的总体设计10 3.1本次设计所要实现的功能10 3.2编程思想10 3.3 功能实现的流程11 3.4 松下PLC实验箱简介13 第四章 控制系统产品选型及硬件设计14 4.1系统的总体结构14 4.2电梯曳引机部分15 4.3 限位器和传感器部分16 4.4 矫厢和开门电动机部分17 4.5 变频器部分17 4.51 曳引变频器参数设置及配线方法 17 4.6 控制器部分19 4.61 可编程控制器的选择 19 4.7 控制系统相关接口设计22 4.7.1 信号控制系统的接口22 第五章PLC控制系统的程序设计部分25 5.1电梯的启动复位25 5.2电梯参数初始化程序段26 5.3 用户输入程序部分27 5.4 系统状态的确定29 5.5电梯开关门子程序32 5.6 检测故障子程序33 5.7 清楚标记子程序36 5.8 电梯空闲状态的处理38 5.9 确定最近上行目标层子程序。41 5.10 电梯上行主程序43 5.11 电梯下行最近目标的确定44 5.12 电梯下行主程序45 第六章结论与展望47 6.1 本次设计的主要成果47 6.2 存在的不足及改进47 致 谢49 摘要 随着社会的不断发展,高层建筑越来越多,而电梯成为了高层建筑楼房的必须设备。由于目前大部分电梯控制系统电梯运行逻辑控制系统采用的是PLC逻辑控制线路。采用这种控制系统大大提高了电梯可靠性、可维护性以及灵活性,延长了使用寿命,同时缩短了电梯的开发周期。在PLC电梯控制系统中目前大多数是采用三菱中型等的PLC进行控制系统设计的。 松下FPX系列PLC是目前最近推出的小型PLC,其功能非常强大。本文将松下PLC应用于五层电梯进行逻辑控制,该电梯控制系统具有司机操作即自动的功能,并且具有集选控制、下行集选、下行集选、故障重开门。故障检测等特点。 关键词:松下PLC 子程序 选层选向 安全性 Abstract As society continues to develop, the higher buildings are more and more . The elevator became a high-rise building to house the equipment. At present most of the lift elevator control system logic control system using PLC logic control Circuit. Using this control system has greatly enhanced the reliability of the lift, maintainability and flexibility to extend the service life of the elevator at the same time shorten the development cycle. PLC in the elevator control system is used in most of medium such as the Mitsubishi PLC control system design FPX PLC is the recently introduced small PLC, its function is very powerful. This paper will be used in Matsushita PLC logic control for five elevator, the elevator control system has drivers automatically operate the functions of control and has set the election, the election set down, down-election, re-fault opened the door. Fault detection and so on.
经管之家“学道会”小程序
  • 扫码加入“考研学习笔记群”
推荐阅读
经济学相关文章
标签云
经管之家精彩文章推荐