发布时间：2015-04-03 来源：人大经济论坛

轻化工程专业论文范文 目 录 中文摘要I 英文摘要II 目录III 1 绪论1 1.1 设计背景与发展状况1 1.2工厂设计的可行性分析4 1.3工程设计的发展状况5 1.4市场需求和设计规模6 2厂址选择与厂区总平面布置7 2.1 址选择厂7 2.2 厂区总平面布置8 3生产工艺设计12 3.1 全厂生产车间组成12 3.2 车间生产综合叙述12 3.3 车间技术经济指标和工艺参数13 3.4 浆水平衡计16 3.5主要设备选型及操作25 4 供水、排水以及三废处理27 4.1 供水27 4.2 排水28 4.3 三废处理29 5 蒸汽及采暖通风31 5.1 动力31 5.2 供热31 5.3 采暖通风32 6 安全技术及防火33 6.1 污染源产生的有害物质33 6.2 防护措施33 7 技术经济34 8 建筑部分36 8.1 建筑标准36 8.2 建筑材料的选用36 8.3 对有特殊要求的厂房建筑处理措施36 9 设计总论37 致 谢38 参考文献39 年产10万吨涂布白纸板制浆造纸综合工厂设计 重点：日产130吨芯浆生产线工艺设计 摘 要：本设计为年产10万吨涂布白纸板制浆造纸综合工厂设计。设计重点为：日产130吨芯浆生产线工艺设计。本设计以废纸为主要原料，经过碎解、筛选、洗涤、净化等工序，制备满足抄造涂布白纸板要求的芯浆。设计内容主要包括以下四部分：第一部分包括以下内容：工程设计的背景、工程设计的必要性和需求预测与设计规模；第二部分包括以下内容：芯浆工艺流程的确定，工艺参数的选定，浆水平衡计算，在此基础上进行设备选型，最后进行平面布置设计，按要求绘制若干张图纸。第三部分包括以下内容：全厂生产车间组成和车间生产综合叙述；第四部分主要包括一些辅助工程的设计：厂房建筑与结构、给水与排水、动力、自控与仪表和环境保护与综合利用以及劳动安全卫生等。 关键词：涂布白纸板；芯浆生产线；工艺流程设计；设备选型设计；平面布置设计 Annual 100000 tons of coating whitepaperboard pulp integrated plant design Key: 130 tons daily of pulp production line core process design Abstract: The design for the annual production capacity of 100,000 tons of Coated White Board integrated pulp and paper plant design. Design as follows: 130 t/d core pulp production line process design. The design for the main raw material for paper, after breaking solution, screening, washing, purification processes, preparation of copy-made to meet the requirements of coated white board core slurry. Design includes the following four parts: the first part include the following: the context of engineering design, engineering and demand forecasting the need for scale and design; the second part includes the following: the determination of core plasma process, the selection of process parameters , serofluid balance calculation, in this based on equipment selection, layout of the final design, drawn by the requirements of a number of Zhang drawings. The third part includes the following: the composition of the whole plant production and the production of a synthesis of the workshop; fourth part mainly includes the design of ancillary works: the construction and structure of plant, water supply and drainage, power, control and instrumentation and environmental protection and comprehensive utilization of and labor safety and health. Keywords：Coated Paperboard; core pulp production line; process design; equipment selection design; layout design