MT手机底盖注射模CAD/CAM_模具专业论文范文
发布时间:
2015-01-24
来源:
人大经济论坛
模具专业论文范文
目录
[摘 要]1
[Abstract]1
第一章 前言3
1.1应用背景及意义3
1.2论文设计内容3
1.3论文设计重点、难点3
第二章 方案论证4
2.1结构分析4
2.2成型工艺分析6
2.3手机底盖的生产规模7
第三章 手机底盖注射模结构设计7
3.1成型零件设计7
3.2浇注系统设计13
3.3镶块的设计14
3.4推出机构的设计15
3.5排气系统的设计16
3.6冷却系统的设计16
3.7模架与注射机的选择16
3.8模具结构草图18
3.9注射模动作过程分析18
第四章 成型零件的三维建模20
4.1零件的设计20
4.2型腔的设计24
4.3小结32
第五章 数控程序的编制34
5.1工艺卡编制34
5.2MILL_CONTOUR知识点34
第六章 注射成型工艺的编制43
6.1概述43
6.2注射成型工艺43
6.3小结45
总结46
谢 辞47
附件48
附件一:工艺卡48
附件二:程序清单50
参考文献52
[摘 要]
在手机底盖注塑模结构设计过程中,设计者针对产品材料性能、结构特点进行工艺分析;通过分析,确定该模具的型腔建数模、分型面、初选了注塑机。然后在Pro/E环境下进行该模具的成型零件设计、模架结构系统设计,最后模具总成,生成二维总装图和非标准零件零件图,并在UG中对手机底盖的型腔进行数控加工。
整套模具设计都基于Pro/ENGINEER4.0与CAD进行,模具总装图和零件图从CAD中生成。本设计实现了模具CAD,对今后从事模具设计具有一定的实际指导意义。
关键词:手机底盖 塑料模具 型腔设计 PRO/E
[Abstract]
Phone bottom cap injection mold design process, the designer for the product material properties, structural characteristics of process analysis; through analysis to determine the build number of the mold cavity mold parting surface, the primaries of the injection molding machine. Then in the Pro / E environment for the mold forming part design, mold design structure, the final mold assembly, to produce two dimensional drawings and non-standard parts assembly parts diagram, and UG in the bottom cover of the pocket for cell phone NC.
Complete mold design and CAD are based on Pro/ENGINEER4.0 conducted mold assembly diagram and parts diagram generated from the CAD. The design and implementation of the mold CAD, mold design in the future has some real significance.
Keywords: mobile phone case back; plastic mold; cavity design and PRO / E