模型运行不成功,主程序界面消息框显示"1 iteration",输出路径图按钮灰的。 F1 <--- MR1 unidentified F1 <--- MR3 unidentified F4 <--- PR1 unidentified F4 <--- PR2 unidentified F4 <--- PR3 unidentified F4 <--- PR4 unidentified F2 <--- UG1 unidentified F2 <--- UG2 unidentified F2 <--- UG3 unidentified F2 <--- UG4 unidentified F3 <--- UA1 unidentified F3 <--- UA2 unidentified F3 <--- UA3 unidentified F3 <--- UA4 unidentified F1 <--- MR2 unidentified BI <--- F1 unidentified BI <--- F4 unidentified BI <--- F2 unidentified BI <--- F3 unidentified AB <--- BI unidentified res4 unidentified res1 unidentified res2 unidentified res3 unidentified res5 unidentified res6 unidentified
输出文档提示:
Degrees of freedom (1952 - 313): 1639
Result (Default model)
The model is probably unidentified. In order to achieve identifiability, it will probably be necessary to impose 10 additional constraints.
Regression Weights:(Group number 1 - Default model)
Variances: (Groupnumber 1 - Default model)
我的模型图:(图片怎么只能作为附件,不能直接贴呢。只好请看附件了)
由于外生潜变量太多,加上两两相关后完全看不清楚,我的模型图是没有增加两两相关的图样,实际运行过程中是增加了两两相关的。而且很奇怪的是,同一个内生潜变量下面的各个外生潜变量之间才需要相关吧,但amos要求我把所有15个外生潜变量之间全部两两相关了一遍,所以相关线非常多密密麻麻。这是怎么回事啊?求高手指导!