合成聚合物对二次纤维抄纸纸张增强工艺的研究_轻化工程专业论文
发布时间:
2015-04-06
来源:
人大经济论坛
轻化工程专业论文范文
目 录
中文摘要Ⅰ
英文摘要
1 绪论1
1.1 研究的意义与背景1
1.2 研究的内容与需要解决的问题1
2 实验具体步骤3
2.1 实验仪器与试剂3
2.2 碎解4
2.3 打浆4
2.4 测水分4
2.5 计算绝干浆用量5
2.6 各种药品加入量5
2.7 抄纸8
2.8 测试物理性能指标9
3 实验结果分析与讨论10
3.1 聚丙烯酰胺PAM10
3.2 阳离子聚丙烯酰胺(CPAM)13
3.3 阳离子聚丙烯酰胺(CPAM)和玉米淀粉(1:3)16
3.4 阳离子聚丙烯酰胺(CPAM)和玉米淀粉(1:5)20
3.5 阳离子聚丙烯酰胺(CPAM)和壳聚糖(1:1)24
3.6 阳离子聚丙烯酰胺(CPAM)和壳聚糖(1:2)28
3.7 阳离子淀粉和聚丙烯酰胺PAM(分子量为300万)二元体系(1:1)32
3.8 综合分析36
4 结论43
致 谢44
参考文献45
合成聚合物对二次纤维抄纸纸张增强工艺的研究
摘要:本论文研究的课题是合成聚合物对二次纤维抄纸纸张增强工艺的影响,这里的合成聚合物我们尝试了以下这几种:聚丙烯酰胺PAM(分子量为300万)、阳离子聚丙烯酰胺(CPAM)、阳离子聚丙烯酰胺(CPAM)和玉米淀粉二元体系(有1:3和1:5两组平行试验)、阳离子聚丙烯酰胺和壳聚糖二元体系(有1:1和1:2两组平行试验)、阳离子淀粉和聚丙烯酰胺PAM(分子量为300万)二元体系(1:1),实验结果的好坏,我们利用两个物理性能的指标看比较,分别是手抄纸的纸张抗张强度和撕裂度。
关键词:聚丙烯酰胺;阳离子聚丙烯酰胺;纸张抗张强度;撕裂度
Improvement of paper strength made from secondary fibers with synthetic polymers
Abstract: This article studies the second synthetic polymer fiber paper paper on enhancing the impact of technology, where the synthetic polymer, we tried the following categories: PAM PAM (molecular weight 3,000,000), cationic polyacrylamide acid amine (CPAM), cationic polyacrylamide (CPAM) and corn starch binary system (with 1:3 and 1:5 two parallel tests), cationic polyacrylamide and chitosan binary system (with 1: 1 and 1:2 two parallel tests), cationic starch and polyacrylamide PAM (molecular weight 3,000,000) binary system (1:1), the quality of experimental results, we use two physical properties comparison of indicators, namely the paper handsheet tensile strength and tear resistance.
Keywords:PAM ; CPAM ; paper tensile strength ; paper tear resistance