-
年产10万吨高强瓦楞原纸造纸车间网部和压榨部的工艺设计_轻化工程专业论文
轻化工程专业论文范文 目录 中文摘要I 英文摘要II 目录III 1 绪论1 1.1 工程设计的背景1 1.2 工程设计的必要性1 1.3 需求预测与设计规模2 2 工程设计条件与总平面布置4 2.1 工程设计条件4 2.1.1 原材料资源条件4 2.1.2 燃料资源条件4 2.1.3 动力资源条件5 2.1.4 劳动力资源条件7 2.2 总平面布置7 3 生产工艺设计11 3.1 全厂生产车间组成11 3.2 车间生产综合叙述11 4 车间公用工程25 4.1 厂房建筑与结构25 4.2 给水与排水25 4.3 动力27 4.4 自控与 仪表28 4.5 环境保护与综合利用28 4.6 劳动安全卫生29 4.6.1 防护措施29 4.6.2 安全防护30 致谢32 参 考 文 献33 摘 要：本设计的题目为年生产10万吨高强瓦楞原纸造纸车间，重点为瓦楞原纸抄纸工段的网部和压榨部工艺设计。本设计以废纸浆制成的面浆为主要原料，配以旧瓦楞纸箱浆为底浆，来生产高强瓦楞原纸。造纸设备采用日产330吨的4000/500叠网多缸纸机。设计内容包括浆水平衡计算图绘制、设备选型及计算、车间设备布置图、工艺流程图。 关键词：抄纸工段; 网部; 压榨部; 瓦楞原纸 Technology Design of wire setion of paper machine for 100,000T/D prodution machine ABSTRACT: It is a technology design of wire section and press section of high strength corrugating paper machine for production 100,000 tons per year . The key point is the Process Design about wire and press section of Corrugating Medium Paper Section. The design uses the waste paper pulp as the main raw material, with the plasma for the OCC at the end of plasma, giving contribute to produce the High-strength medium. The paper-making equipment meet the demand of the Nissan overlapping network of multi-cylinder paper machine 4000/500, which has the maximum productive capability of 330 tons per day. The process of design includes the process of the balance between pulp and water , the selection and calculation of equipment, Workshop equipment layout and the chart of designing process. Key words: Paper Section; Net section; Press section ; corrugating medium
-
日产160吨底浆生产线工艺设计_轻化工程专业论文范文
轻化工程专业论文范文 目 录 中文摘要I 英文摘要II 目录III 1 绪论1 1.1 设计背景与发展状况1 1.2 工厂设计的可行性分析1 2 厂区和车间布置说明3 2.1 厂区总平面布置3 2.1.1厂区总平面布置的基本原则3 2.1.2厂区总平面布置的概述4 2.2 车间设备布置6 2.3 运输设计6 2.4 厂区绿化6 2.5 车间工作制度7 2.6 产品有关标准7 3 全厂产品结构和生产方法9 4 生产工艺设计10 4.1 车间概况及特点10 4.2 底浆生产工艺流程10 4.3 车间技术经济指标和工艺参数10 5 设备衡算和设备选型12 5.1 浆水平衡计算12 5.2 浆水平衡明细表22 5.3 主要设备选型及计算25 6 供水、排水等能耗及三废处理28 6.1 水、电、气等供应28 6.2 排水28 6.2.1 生产排水的水质特征28 6.2.2 排水口28 6.3 三废处理29 6.4 产品能耗状况31 7 安全技术及防火32 7.1 污染源产生的有害物质32 7.2 防护措施32 7.3 人员培训32 8 设计总结34 致 谢35 参考文献36 年产15万吨牛皮挂面箱板纸制浆造纸综合工厂设计 重点：日产160吨底浆生产线工艺设计 摘要：挂面箱纸板是浙江省的主要纸产品之一，以牛皮浆挂面的箱纸板以其优良的使用性能，是高档产品的主要运输包装材料，其市场需求较大。废纸是牛皮挂面箱纸板的最主要原材料。废纸作为重要的可再生资源，其回收利用是解决造纸工业原料短缺、能源紧张和污染严重等三大问题的有效途径［2］。废纸制浆车间更是生产废纸浆及其纸制品的制浆造纸综合工厂的重要生产车间，其中底浆车间时牛皮挂面箱纸板的主要生产车间之一。本文是对年产15万吨牛皮挂面箱纸板的日产160吨底浆生产线工艺的初步设计。设计的内容主要包括： （1）建厂的可行性分析；（2）全厂产品结构和生产方法说明；（3）本车间产品特点及工艺流程、工艺条件的选择；（4）各主要设备物料衡算、设备选型计算；（5）车间水、电、气、消耗技术经济指标及劳动、组织人员编制；（6）车间工艺设备布置说明；（7）设计成果综合评述。 关键词：牛皮挂面箱纸板；底浆；生产工艺 Comprehensive Factory of Making Pulp and Paper that Produces 150,000 Tons Kraft Paper Liner Board a Year Focus: Technological Design of 160 Tons Prime Paper Pulp Making Liner Abstract: Test liner board is the main paper product, and the kraft liner board is the main shipping package material because of its good usability, so its market demand is big. The waster paper is the main raw material of the kraft liner board. As the important renewable resource, its recycling is the good way to deal with these problems: the lack of industrial raw material, energy shortage and seriously polluted and so on. The workshop with waster paper pulping is important comprehensive production department which produce waste paper pulp and liner board, the workshop with making prime pulp is the main workshop with producing kraft liner board .This paper is to explain the comprehensive factory of making pulp and paper that produces 150,000 tons kraft paper liner board a year, the point is the workshop where 160 tons waste paper prime pulp is made a day, the main contents of design include: (1) Feasibility analysis of building a mill；(2)Product mix and production process of all mill；(3)Product features of the workshop and the choice of technological flow and process condition；(4)Mass balance and equipment selection of the main equipments；(5)Consumption indicator of water, gas and electricity and size of personnel force；(6)Arrangement explanation of processing equipment in the mill； (7)General survey of design KEY WORDS: kraft liner board, prime paper pulp, producing technology
-
年产8万吨涂布白板纸制浆造纸综合工厂设计_轻化工程专业论文
轻化工程专业论文范文 目 录 摘要…………………………………………………………………………………I ABSTRACT……………………………………………………………………………II 目 录 …………………………………………………………………………… III 1 工程设计背景与发展状况………………………………………………………1 1.1 工程设计的背景……………………………………………………………1 1.2 工程设计的必要性…………………………………………………………4 1.3 工程设计的发展状况………………………………………………………5 1.4 需求预测与设计规模………………………………………………………6 2 工程设计条件与总平面布置……………………………………………………6 2.1工程设计条件……………………………………………………………… 6 2.2 总平面布置…………………………………………………………………7 3 生产工艺设计……………………………………………………………………10 3.1 全厂生产车间组成…………………………………………………………10 3.2 车间生产综合叙述…………………………………………………………10 3.3 车间技术经济指标和工艺参数……………………………………………11 3.4 浆水平衡计算………………………………………………………………13 3.5 设备选型说明………………………………………………………………17 3.6 生产车间的布置说明………………………………………………………17 4 车间公用工程……………………………………………………………………17 4.1 厂房建筑与结构………………………………………………………………17 4.2 给水与排水…………………………………………………………………18 4.3 动力…………………………………………………………………………19 4.4 自控与仪表…………………………………………………………………20 4.5 环境保护与综合利用…………………………………………………… 20 4.6 劳动安全卫生………………………………………………………………21 5 工程经济分析……………………………………………………………………23 6 结论………………………………………………………………………………25 致谢…………………………………………………………………………………27 参考文献……………………………………………………………………………28 年产8万吨涂布白板纸制浆造纸综合工厂设计 重点：日产240吨涂布白板纸干燥部、涂布及完成整理部工艺设计 摘 要 本设计的题目为年生产8万吨涂布白纸板制浆造纸综合工厂，重点为日产240吨涂布白板纸干燥部、涂布及完成整理部工艺设计。本设计以废纸为主要原料，经过碎解、脱墨等工序抄造涂布白纸板。造纸设备采用日产240吨的四叠网纸机，设计内容包括浆水平衡计算图绘制、设备选型及计算、车间设备平面布置图、工艺流程图绘制。人员的技能条件要求，原料的分类管理，运输管理设计，厂区绿化布局，给水排水规划，污染物的净化和排放，环境保护和综合利用。 关键词：制浆造纸，涂布白纸板，造纸车间，干燥 Annual 8ten thousand of coating whitepaperboard pulp integrated plant design Key: 240 t/d of coating, coating, dry white paper and arrangement of process design ABSTRACT： The design of the topic for produced 80,000 tons of coated paper pulp and paper board, comprehensive factory for 240 t/d of coating whitepaperboard dry, coating and arrangement of process design. This design to waste as main raw materials, after pulp, etc ChaoZao deinking coated paper board. Paper-making equipment adopts 240 t/d of paper pulp, design includes water balance calculation drawing and equipment selection and calculation, workshop equipment layout, process flow diagram. Conditions require the skills of personnel, the classification of raw materials management, transportation management and design, green plant layout, water supply and drainage planning, decontamination and disposal of pollutants, environmental protection and comprehensive utilization. Keywords: Pulp and papermaking, coated paper board, workshop, dry
-
日产150吨涂布白板纸打浆、流送系统工艺设计_轻化工程专业论文
轻化工程专业论文范文 目 录 摘要………………………………………………………………………………………I ABSTRACT…………………………………………………………………………………II 1 工程设计背景与发展状况………………………………………………………………1 1.1 工程设计的背景……………………………………………………………………1 1.2 工程设计的必要性…………………………………………………………………3 1.3 工程设计的发展状况………………………………………………………………3 1.4 需求预测与设计规模………………………………………………………………4 2 工程设计条件与总平面布置 …………………………………………………………5 2.1工程设计条件 ……………………………………………………………………5 2.2 总平面布置 ………………………………………………………………………5 3 生产工艺设计……………………………………………………………………………7 3.1 全厂生产车间组成 ………………………………………………………………7 3.2 车间生产综合叙述 ……………………………………………………………… 3.3 车间技术经济指标和工艺参数 …………………………………………………8 3.4 浆水平衡计算……………………………………………………………………10 3.5 设备选型说明……………………………………………………………………12 4 车间公用工程…………………………………………………………………………15 4.1 厂房建筑与结构：………………………………………………………………15 4.2 给水与排水… …………………………………………………………………16 4.3 动力 ………………………………………………………………………………17 4.4 自控与仪表… ……………………………………………………………………17 4.5 环境保护与综合利用 ……………………………………………………………18 4.6 劳动安全卫生 ……………………………………………………………………19 5 工程经济分析……………………………………………………………………………20 5.1车间人员编制………………………………………………………………………20 5.2 车间成本估计 ……………………………………………………………………21 6 小结 ……………………………………………………………………………………22 致谢…………………………………………………………………………………………23 参考文献……………………………………………………………………………………24 年产5万吨涂布白板纸制浆造纸综合工厂设计 重点：日产150吨涂布白板纸打浆、流送系统工艺设计 摘 要 本设计的题目为年生产5万吨涂布白纸板制浆造纸综合工厂，重点为日产150 吨涂布白板纸打浆、流送系统工艺设计。本设计以废纸为主要原料，经过碎解、除砂、 脱墨，筛选、打浆、流送、抄纸、干燥等工序抄造涂布白纸板。造纸设备采用日产150吨的四叠网纸机，用电全来自10万千瓦自备热电站，设计内容包括工厂平面设计图绘制，人员的技能条件要求，原料的分类管理，运输管理设计，厂区绿化布局，给水排水规划，污染物的净化和排放，环境保护和综合利用。浆水平衡计算图绘制、设备选型及计算、车间设备平面布置图、工艺流程图绘制。 关键词：制浆造纸，打浆，涂布白纸板，造纸车间， Annual 5 tan thousandtons of coating whitepaperboard pulp integrated plant design Key: Nissan 150 tons of coated paper whiteboard beating, Process flow design ABSTRACT The design of the topic for produced 50,000 tons of coated paper pulp and paper board, comprehensive factory for nissan 150 Tons of coating whitepaperboard beating, Flow System of process design. This design to waste as main raw materials, dsanding, Deinking, screening, beating, flow, paper, dry etc ChaoZao deinking coated paper board. Paper-making equipment adopts nissan 150 tons of paper pulp, Electricity wholly owned 100,000 kilowatts from thermal power plants，design includes mpping plant design, staff skills conditions, the classification of raw materials management, transportation management and design, green plant layout, water supply and drainage planning, decontamination and disposal of pollutants, environmental protection and comprehensive utilization of water balance calculation drawing and equipment selection and calculation, workshop equipment layout, process flow diagram. key words:Pulp and papermaking,beating, coated paper board, workshop
-
微粒助留助虑体系用于抄造装饰原纸的研究_轻化工程专业论文
轻化工程专业论文范文 目 录 中文摘要I 英文摘要II 目录III 1 绪 论1 1.1选题的背景与意义1 1.2相关的研究进展2 1.2.1 Compzil系统3 1.2.2 Hydyocol系统3 1.2.3 Hydrosil系统4 1.3本课题的研究意义4 1.4拟采取的实验方案5 2实验方法及检测6 2.1 实验方法6 2.2 试验准备(原料)8 2.3 试验仪器及工作原理8 2.3.1仪器8 2.3.2仪器工作原理9 2.4 试验数据的处理及计算方法11 3 试验及结果讨论15 3.1硫酸铝的实验结果讨论15 3.2 CPAM-膨润土的实验结果讨论17 3.3胶体二氧化硅和阳离子淀粉的实验结果讨论20 3.4聚铝类和微聚合物类助留助滤剂的实验结果讨论25 3.5成纸的灰分测定30 4 结 论31 致 谢32 参考文献33 摘 要 本文简述了装饰原纸在助留助滤方面的的一些基本情况，以及造纸湿部助留助滤体系的发展概况：如由瑞典埃卡诺贝尔(EKA Nobel )公司开发的助留助滤系统Compzil系统，由英国联合胶体公司(AlliedColloids)开发的Hydyocol系统和由瑞典Bovliden Kemi Ab公司开发的Hydrosil系统。装饰纸原纸是一种高填充纸，在原纸的抄造过程中其留着不佳将明显提高生产成本，所以开发合适的装饰纸原纸专用助留体系，在装饰纸原纸的生产中具有特别重要的意义。研究了几种助留助滤体系对装饰原纸的助留助滤的效果，使用了了FPA纤维电荷测定仪、动态滤水仪和可见光光度计的仪器测定了纸浆的Zeta电位和过滤时间等一些性质。实验结果表明：单元助留助滤体系对纸浆的助留助滤效果不是很好，双元助留助滤体系效果较好。 关键词：助留助滤；Zeta电位；动态滤水；微粒助留助滤体系 Retention of particulate consider the system for making decorative paper copy of the study Abstract：In this paper, decorative paper in the Retention of some of the basic aspects of the situation, as well as Wet Retention and Drainage System Development: If Illueca by the Swedish Nobel (EKA Nobel) developed Retention system Compzil system, by the British company United colloid (AlliedColloids) developed by the Swedish Hydyocol systems and Bovliden Kemi Ab developed Hydrosil system. Decorative base paper is a high filler paper, the copy paper made in the course of the poor keep their production costs will be markedly improved, so the development of a suitable base paper decorative paper dedicated retention system in the production of decorative paper in the paper is of particular importance significance. Several studies Retention and Drainage System of decorative paper Retention of the effect of the use of the FPA detector fiber charge, dynamic treatment instrument and visible light photometer instrument measured the Zeta potential of pulp and filter time Some properties. The experimental results show that: Retention module system pulp Retention is not a very good effect, Dual Retention system better. Keywords：Retention consideration; Zeta potential; dynamic consideration of water; particulate Retention and Drainage System
-
日产70吨衬、底浆生产线工艺设计_轻化工程专业论文范文
轻化工程专业论文范文 目录 中文摘要............................................................ .Ⅰ 英文摘要............................................................ .Ⅱ 目录............................................................ .. .III 1 工程设计背景与发展状况1 1.1 工程设计的背景1 1.2 工程设计的必要性1 1.3 需求预测与设计规模2 1.3.1 需求预测2 1.3.2 设计规模2 2 工程设计条件与总平面布置5 2.1 工程设计条件5 2.2 总平面布置6 3 生产工艺设计8 3.1 全厂生产车间组成8 3.2 车间生产综合叙述8 4 车间公用工程34 4.1 厂房建筑与结构34 4.2 给水与排水34 4.3 动力36 4.4 自控与仪表37 4.5 环境保护与综合利用37 4.6 劳动安全卫生40 致谢 43 参考文献 44 年产10万吨涂布白纸板制浆造纸综合工厂设计 重点：日产70吨衬、底浆生产线工艺设计 摘 要：本设计是一个年产10万吨涂布白板的制浆造纸综合工厂，重点是日产70吨衬、底浆制浆车间。本说明书从总体上对涂布白纸板制浆造纸综合工厂作了介绍，阐述了建厂的必要性和可能性。本设计共分为四个部分。第一部分包括以下内容：工程设计的背景、工程设计的必要性和需求预测与设计规模；第二部分包括以下内容：工程设计条件和总平面布置；第三部分包括以下内容：全厂生产车间组成和车间生产工艺叙述；第四部分包括以下内容：厂房建筑与结构、给水与排水、动力、自控与仪表和环境保护与综合利用以及劳动安全卫生。 关键词：制浆造纸，废纸脱墨，涂布白纸板 One Pulping and Paper-making Integrated Plant of White Coated Paper-board with Annual Production Capacity of 100,000 tons Focus: One Pulping Workshop of Deinked Pulp and Base Pulp with a Production Capacity of 70tons per Day Abstract:The design is a production of 100,000 tons per year of white coated paperboard integrated plant, the focus is a production of 70 tones of deinking pulp and base pulp workshop.The white coated paperboard integrated plant is generally introduced in the description, the mill-establishing possibility is also analyzed. The design is divided into four parts. The first part includes the following : engineering background, the need and demand for engineering and design size; The second part comprises the following elements : overall project design conditions and horizontal layout; The third part consists of the following : the composition of the entire plant production workshop and workshop production of technology narrative; The forth part consists of the following elements : plant construction and structure, water supply and drainage, power, robotic instruments and resources as well as environmental protection and labor safety and health. KEY WORDS: pulping and paper-making, waste-paper deinking, white coated paperboard
-
生物酶法对新型油墨的脱除研究_轻化工程专业论文范文
轻化工程专业论文范文 目 录 摘要 ABSTRACT 1 绪论1 1.1 研究的背景和意义1 1.1.1 造纸工业现状1 1.1.2 目前的废纸脱墨情况1 1.1.3 生物酶法脱墨研究2 1.2 研究的内容和所需解决的问题4 2 混合废纸的脱墨研究6 2.1 实验原料、仪器及方法6 2.2 数据处理和结果讨论8 2.3 生物酶法最佳工艺条件脱墨12 2.4 生物酶法最佳工艺条件脱墨与化学法脱墨的结果比较12 2.5 小结13 3 紫外油墨上光纸的脱墨研究14 3.1 实验原料、仪器及方法14 3.2 数据处理和结果讨论15 3.3 生物酶法最佳工艺条件脱墨19 3.4 生物酶法最佳工艺条件脱墨与化学法脱墨的结果比较19 3.5 小结20 4 结论21 致 谢22 参考文献28 摘要：本论文所研究的是生物酶在废纸碎浆时对油墨的脱除作用，此研究所用到的生物酶是工业生产的混合酶制剂。选用书本纸和经紫外油墨上光的纸张（比例为2:1）以及单一的紫外油墨上光的纸张，分别通过正交试验法进行酶处理，测试所抄得纸张的物理性能指标（主要是白度和残余油墨量），并通过数据的分析比较，得出以下结论：经生物酶处理的抄得的纸张与经化学法处理抄得的纸张相比，白度高，残余油墨量少。生物酶对书本纸和经紫外油墨上光的纸张（比例为2:1）处理的最佳条件组合为：酶处理时间为30 min，pH值为9，温度为60℃，酶用量为废纸绝干量的0.3%。对单一紫外油墨上光的纸张处理的最佳条件组合为：酶处理时间为30 min，pH值为8，温度50℃，酶用量为废纸绝干量的0.3%。反应时间和酶用量是影响实验结果的主要因素，温度和pH值是次要因素。 关键词：生物酶；紫外油墨；白度；残余油墨量 Cellulase Deinking of Waste Printed by New Ink Abstract ：In this paper, the industrial production of hybrid enzymes was used to deinked the waste paper, which included old messages mixed with coated paper by UV (the ratio of 2:1) and a single UV ink coating of paper. Experiments were carried out with enzyme treatment according to the orthogonal methods. Then, the physical properties (mainly whiteness and residual ink volume) of finished paper were examined. The results showed that the samples treated by enzyme obtained higher brightness and less residual ink as the industrial dosage respectively. The optimum condition for deinking of OMG mixed with UV ink coating of paper (the ratio of 2:1) was: enzyme treatment time is 30 minutes, pH = 9, temperature was 60 ℃, and the dosage of enzyme was 0.3% based on the absolutely weight of fiber. For the single coated paper by UV ink, when the dosage of enzyme was 0.3%, pH value 9, treating time 30 minutes and temperature 50℃, the idealist result was obtained. Treating time and the dosage of enzyme were the main factors which influence the results, and reacting temperature and pH value were secondary factors. Key words: cellulose; UV ink; brightness; residual ink amount
-
装饰原纸增湿強及再制浆工艺的研究_轻化工程专业论文
轻化工程专业论文范文 目 录 中文摘要 英文摘要 目录 III 1 绪 论1 1.1 选题的背景与意义1 1.2 湿增强剂的分类及发展趋势2 1.3 几种常见湿強剂的制备方法4 1.4 PPE树脂的增强机理及应用技术7 2 实验方法及检测10 2.1 实验方法10 2.2 试验准备(原料)11 2.3 试验仪器及工作原理12 2.4 试验数据的处理及计算方法13 2.4.1 增湿強实验13 2.4.2 装饰纸湿強纸再制浆实验14 3 试验及结果讨论16 3.1 增湿強实验16 3.2 装饰纸湿強纸再制浆实验20 4 结 论27 致 谢28 参考文献29 摘 要：近几年，由于中国经济的快速增长为造纸工业的发展提供了新的机遇与发展空间，我国纸业取得了长足的进步，纸张在各行各业应用范围不断扩大。但是与国外同行相比，我国大多造纸企业相对而言较为落后，经济效益不佳，传统产品的市场竞争十分激烈，而适用于新领域中的特殊纸种，往往给企业带来可观的效益，因此许多造纸企业在生产文化用纸、包装用纸等常规大需求量的品种的同时，开始注重生产高附加值的工业用纸、特种用纸等纸种，装饰原纸作为其中的代表正逐渐受到造纸企业的青睐。湿强度对于要用来印刷的装饰原纸来说，是一个重要的特性指标。湿強剂属于功能性添加剂，大多数是抗水解的合成树脂，在纸成形前加入到纸浆中，不仅可以提高湿强度，也可以给高速纸机的操作创造有利条件。 本论文主要介绍了现在应用最广泛的湿強剂—聚酰胺聚胺环氧氯丙烷树脂（PAE树脂）的加入量对纸张湿强度的影响以及加过湿強剂的装饰原纸加入不同化学药品再制浆的研究。 关键词：装饰原纸；湿強剂；聚酰胺聚胺环氧氯丙烷树脂 The research for Increasing Wet Strength and Re-pulping Technology of Decorative base paper Abstract: In recent years, due to Chinese rapid economic growth for the paper industry for the development of new opportunities and development space, Chinese paper industry has made considerable progress in all walks of life in paper applications continue to grow. But compared with foreign counterparts, Chinese paper-making enterprises, most relatively backward and poor economic efficiency, the traditional market is extremely competitive, and apply to new areas of special types of paper, often to the business will generate substantial benefits So many paper-making enterprises in the production of cultural paper, packaging paper, and other big demand for conventional varieties at the same time, began to pay attention to the production of high value-added of industrial paper, special paper, and other kinds of paper, decorative base paper as one of the representatives are Gradually by paper-making enterprises of all ages. Wet strength to be used for the decorative printing paper, it is an important indicator of the properties. Wet Strength Agent additives are functional, most of whom are anti-hydrolysis of synthetic resin, before forming the paper into pulp, not only can improve the wet strength, high-speed paper machine can also create favorable conditions for the operation. This paper introduced the now the most widely used wet-strength agent - polyamide polyamine epichlorohydrin resin (PAE resin) addition on the strength of wet paper and wet strength agent added over the decorative paper with different chemicals Study re-pulping. Keywords: Decorative base paper; wet strength agent; Polyamine epichlorohydrin polyamide resin
-
年产12万吨涂布白纸板工厂芯浆与底浆生产线工艺设计_轻化工程专业论文
轻化工程专业论文范文 目 录 中文摘要I ABSTRACTII 1 绪 论1 1.1 设计背景2 1.2 工厂设计的可行性分析4 1.3 设计任务8 1.3.1 简介8 1.3.2 题目8 2 厂址选择与厂区总平面布置9 2.1 厂址选择9 2.1.1 厂址选择的基本原则9 2.1.2 厂址的选择9 2.2 工程建设条件9 2.3 厂区总平面布置10 3 生产工艺设计13 3.1 生产车间组成14 3.2 车间生产综合叙述15 3.3 生产工艺18 3.3.1 概述18 3.3.2工艺流程18 3.4 浆水平衡计算22 3.5设备选型74 3.6备布置图的简要说明及特点85 3.6.1 车间设备布置的要求86 3.6.2车间布置简述 86 4 车间公用工程86 4.1 厂房建筑与结构87 4.2 给水与排水87 4.2.1 生产用水87 4.2.2 消防用水88 4.2.3 生活用水88 4.2.4 排水88 4.3 供电与供热89 4.4 环境保护与综合利用89 5 工程经济分析89 5.1 车间组织与劳动定员89 5.2 工程设计综合评价90 参考文献91 致谢92 年产12万吨涂布白纸板工厂设计 重点：芯浆与底浆生产线工艺设计 摘 要：2008年的金融危机给全国中小企业带来剧烈的冲击，在造纸行业，中小企业由于资金少、技术落后等问题，面临破产的危机。本文是对年产12万吨的涂布白纸板制浆造纸综合工厂设计进行说明，重点是废纸制浆工段，笔者通过工厂参观实习，并查阅造纸方面的有关文献书籍，借鉴前人的经验，对废纸制浆工段底浆和芯浆的工艺进行论证，思考，希望设计出的东西对中小企业有所帮助。设计的主要内容包括： （1）绪论 （2）工程设计背景和发展状况 （3）设备选型及计算 （4）浆水平衡计算图绘制 （5）车间平面布置 （6）车间工艺设计 （7）工艺流程图 关键词：涂布白纸板；废纸制浆；芯、浆流程；浆水收支 120,000 tons annual production capacity of plant design Coating White PaperBoard Focus: core pulp and pulp production line at the end of process design Abstract: 2008 financial crisis brought about by intense national small and medium-sized shocks, in the paper industry, small and medium enterprises as a result of less capital, backward technology and other issues facing the crisis of bankruptcy. This article is an annual output of 120,000 tons of pulp and paper Coated White Board described integrated plant design, with a focus on pulp and paper section, the author tour through the factory training, and access to relevant literature paper books, learn from their predecessors experience, the end section of the paper pulp slurry and the core plasma to demonstrate the process, thinking, I hope things designed to help small and medium enterprises. The main elements of the design include: (1) Introduction (2) engineering design and development background (3) conditions for engineering design and general layout (4) mapping serofluid balance calculation (5) workshop layout (6) process design workshop (7) Engineering Economic Analysis Keywords：Coating Paperboard；pulp with waste paper；Core, plasma flow；balance of payments serofluid
-
年产10万吨涂布白板纸板工厂面浆与衬浆生产线工艺设计_轻化工程专业论文
轻化工程专业论文范文 目 录 中文摘要I 英文摘要II 目录III 1. 绪论1 1.1 目的和意义1 1.2 国内外生产状况1 1.3 本生产工艺流程的内容与要求2 1.3.1 本生产工艺流程的内容2 1.3.2 本生产工艺流程的要求3 2. 质量技术指标3 2.1 涂布白板纸的质量技术指标3 2.2 涂布白板纸的规格4 3. 制作系统的工艺流程4 3.1 面浆生产工艺流程4 3.2 衬浆生产工艺流程5 3.3 面、衬的流送系统工艺流程5 4．浆水平衡6 4.1 浆水平衡参数表6 4.2 浆水平衡计算7 5．设备选型论证与计算33 5.1 设备选型的依据和原则33 5.2 设备选型的论证33 5.3 设备选型计算39 6．总结49 致谢50 参考文献51 年产10万吨涂布白板纸板工厂设计 重点：面浆与衬浆生产线工艺设计 摘 要：涂布白板纸是国内外的市场需求量较大、发展较快的主要纸种之一。其主要作用是用于各种包装，为了满足国内市场的需要，全国各地，纷纷上了不少白纸板新项目。国产白纸板的生产能力也在成倍的增加。面对日益激烈的市场竞争，如何降低涂布白纸板的成本，提高市场竞争力，成为了不少企业需要面对的重点问题。 本设计为年产10万吨涂布白板纸的工厂设计，主要分为两大部分：一是面浆生产线的工艺设计；二是衬浆生产线的工艺设计。设计过程中，根据制浆造纸相关手册中的造纸工艺流程，结合工厂的生产实际，确定生产线流程，并画出流程图，进行浆水衡算和设备选型。 由于设计经验不足，整个制浆工艺流程和工厂的设计存在着一定的缺陷，有待于在实践中根据实际情况进行进一步的改进。 关键词：涂布白板纸；脱墨废纸；高浓除砂。 100,000 tons annual production capacity of coated white cardboard plant design Focus: face and lining slurry pulp production line process design Abstract: White coated paper is greater market demand at home and abroad, the development of a faster one of the main paper. Its main role is for a variety of packaging, in order to meet the needs of the domestic market, all over the country, one after another on a lot of white board new projects. White Board made the increase in production capacity is also doubled. Faced with increasingly fierce competition in the market, how to reduce the cost of Coated Paperboard, improve market competitiveness, many enterprises need to become the key problems. The design for the annual production capacity of 100,000 tons of coated paper white plant design, is divided into two major parts: First, plasma surface technology production line design; Second liner pulp production line process design. The design process, according to Pulp & Paper-related paper in the manual process, combined with the actual production plants to determine the production line processes, and draw a flow chart for accounting serofluid and equipment selection. Due to lack of design experience, the entire pulping process and the design of the factory there is a certain amount of defects, to be in practice, according to the actual situation to improve further. Keywords：White board paper coating; deinking of waste paper; Desanding high concentration.
