热量计的硬件电路设计_自动化专业论文范文-经管之家官网！

坛友互助群

扫码加入各岗位、行业、专业交流群

目 录
1绪 论1
1.1 我国供热现状1
1.2 发达国家热计量收费的概况2
1.3 开发热量计的现实意义和应用前景2
1.4 供热计量的合理方式3
1.5 本设计研究内容和目标4
2 热量计的硬件电路设计5
2.1热量计量系统框图5
2.2 热量计计热原理6
2.3 热量计硬件原理框图7
2.4 信号处理部分8
2.4.1 单片机系统结构8
2.4.2 单片机外围电路设计10
2.5 温度信号测量11
2.5.1 热量计测量部分11
2.5.2 差动放大器13
2.5.3 A/D转换器与89C51的连接图14
2.5.4 温度测量电路16
2.6 流量信号测量16
2.6.1 流量的概念16
2.6.2 流量测量原理17
2.6.3 流量测量的设计17
2.6.4 流量测量电路19
2.7 显示部分设计19
2.8 本章小结20
3热量计软件设计22
3.1 编程语言介绍22
3.2初始化主程序22
3.3 温度测量子程序流程设计23
3.4流量测量子程序流程设计23
3.5热量计量子程序流程设计25
3.6按键子程序流程设计26
3.7显示子程序流程设计26
3.8 本章小结27
结论29
致 谢30
参考文献31

摘 要
本设计介绍了一种新型的热量计，该热量计是基于MCS-51单片机，主要由流量传感器、温度传感器、单片机三部分组成。温度信号测量电路是热量计的测温部分，它由三端稳压器(MC7805),温度传感器(Cu100)、差动放大器(AD620)和A/D转换器(AD1674)组成。流量测量的原理大致可分为两类，即直接测量流量的方式和先求流速再通过流速乘以横截面积来求流量等方式。单片机MCS-51为主组成的基本模块是该系统的核心部分，主要完成对系统采集到的信号进行相关的处理，协调其他模块，使整个系统步调一致的工作。基于以上元件，设计一套用于计量热量的智能低功耗热量计系统。尽量使系统的电流消耗达到最小，并且参数能够通过LED数码管显示出来。本设计详细阐述了热量计的硬件和软件设计，成功的设计一套用MCS-51控制的智能热量计。本热量计是内嵌微处理器的智能化测量仪表，与传统的机械式仪表相比具有结构简单、安全可靠、实时性好、灵敏度高；操作简便，用户通过一个按键就可以查询所有数据和信息，并在LED上显示出来，结果直观。和传统仪表相比成本大大降低，而且抗干扰性好、安装维护方便、测量精度高，具有较高的性价格比。

关键词：热量计；单片机；流量计；温度传感器；流量传感器

Calorimeter's hardware circuit design
Abstract
This design introduced one kind of new calorimeter. this calorimeter is based on the MCS-51 monolithic integrated circuit. mainly by the flow sensor, the temperature sensor, the monolithic integrated circuit three parts is composed. The temperature signal measurement electric circuit is calorimeter's temperature measurement part, it by three end manostats (MC7806), the temperature sensor (Cu100), differentiator amplifier (AD620) and a/D switch (AD1674) is composed. Flow measurement's principle may divide into two kinds approximately, namely the direct measurement current capacity's way and asks the speed of flow to be multiplied by the plan area first through the speed of flow to ask ways again and so on current capacity. Monolithic integrated circuit MCS-51 composes primarily the basic module is this system's hard core, mainly completes the signal which gathers to the system to carry on related processing, is coordinated other modules, causes work which the overall system marches in step. Based on the above part, designs a set to use in measuring the thermal intelligent low power loss calorimeter system. Enables system's current consumption to achieve as far as possible is smallest, and the parameter can demonstrate through the LED nixietube. As soon as this design elaborated calorimeter's hardware and the software design in detail, the success design applies mechanically the MCS-51 control the intelligent calorimeter. This calorimeter is in inlays microprocessor's intellectualization measuring instrument, compares with the traditional mechanical measuring appliance has the structure simply, safe reliable, timeliness to be good, the sensitivity is high; The power loss is low, overall system's dynamic power loss only then about 50uA, about static power loss only luA, only then above people's good guarantee use battery power supply 5 years; Operates easily, the user may inquire all data and the information through a pressed key, and on LED demonstrated that the result is direct-viewing. Compares the cost with the traditional measuring appliance to reduce greatly, moreover the anti-jamming good, installs the maintenance to be convenient, the measuring accuracy is high, has the high performance/price ratio.
Keywords:; Calorimeter; Monolithic integrated circuit; Flowmeter; Temperature sensor; Flow senso

扫码或添加微信号：坛友素质互助

「经管之家」APP：经管人学习、答疑、交友，就上经管之家！
免流量费下载资料----在经管之家app可以下载论坛上的所有资源，并且不额外收取下载高峰期的论坛币。
涵盖所有经管领域的优秀内容----覆盖经济、管理、金融投资、计量统计、数据分析、国贸、财会等专业的学习宝库，各类资料应有尽有。
来自五湖四海的经管达人----已经有上千万的经管人来到这里，你可以找到任何学科方向、有共同话题的朋友。
经管之家（原人大经济论坛），跨越高校的围墙，带你走进经管知识的新世界。
扫描下方二维码下载并注册APP