-
路宝车通风百叶窗总成双腔注射模设计_模具专业论文
模具专业论文范文 Abstract With the developing of the plastic industry, the plastic injection mould has already been become one of the main methods of manufacturing plastic products. According to the designing of Lu Bao ventilation shutter integration double cavity injection Mould .Firstly, this paper introduced the selection basis and significance of subject ,the development situation at home and abroad , the main topics to be taken by the content and methods, difficulty parts of design and solutions and development prospects of injection mould . And then introduce the whole design process. Analysis the plastic parts, select the injection machine and check some parameters .At last, overall design of injection machine , including geometric shape and size of molding and component design , molten plastic transportation of runner system , the overflow and air-entraining system design which affects the precision of plastic parts. temperature control system in cooling system、separate and remove the molding of plastic parts of ejection mechanism and mould base. With UG three dimension design to draw the appearance of plastic parts. Use the slanted guide pillar and sliding core to complete the pulling action of cavity-hole in this paper. Experiential learning is described in the end of the paper. Key words: Injection plastic; Cooling System; Mould base; Side core-pulling mechanism; Ejection mechanism 摘 要 随着塑料工业的发展，注塑模已经成为塑料制品的主要成型方法之一。 针对路宝车通风百叶窗总成双腔注塑模的设计，本文首先介绍了课题选择的依据和意义、课题的国内外研究现状、课题的主要内容及拟采取的方法、设计的难点与解决方法和注塑模的发展前景。接着介绍了注塑模的整个设计流程。分析塑件、选取注射机并进行部分参数的校核。然后是注塑模的整体设计，包括成型塑件几何形状和尺寸及其零部件设计、输送熔融塑料的浇注系统设计、排出影响塑件精度气体的排溢与引气系统设计、冷却系统中的温度调节系统设计、分离并取出成型塑件的脱模机构设计以及模架设计。并用UG三维实体设计画出本塑件的外型结构。本文利用斜导柱和活动型芯完成塑件上侧向凹孔的抽芯动作。本文最后阐述了此次设计的心得体会。 关键词：注塑模；冷却系统；模架；侧向抽芯机构；脱模机构 论文目录，请与本站客服联系查看。
-
某机隔框连接件三维建模及数控加工程序设计_模具专业论文
模具专业论文范文 目 录 1 引言1 1.1 题目分析1 1.2 方案2 1.3 经济技术性分析2 2 数控加工4 2.1 数控机床概述4 2.2 数控加工的概念4 2.3 数控机床的工作原理4 2.3.1 数控机床的组成4 2.3.2 数控机床的工作原理5 2.4 数控加工工艺概述5 2.5 数控加工工艺的主要内容5 2.6 数控机床的合理选用6 2.6.1 数控机床的应用范围6 2.6.2 把握好技术经济尺度，选好数控机床6 2.7 APT语言7 2.7.1 几何语句的定义7 2.7.2 刀具运动语句7 3 62框工艺规程9 4 建立62框数学模型11 4.1 CATIA软件介绍11 4.1.1 零件设计工作平台的步骤和界面12 4.1.2 进入草图工作平台的步骤13 4.2 62框CATIA建模16 4.3 生成工程图32 5 62框数控加工37 5.1 数控加工设备选择37 5.2 62框上表面加工42 5.3 62框下表面加工50 5.4 转动轴套加工51 结束语54 致 谢55 参考文献56 摘 要 本文是一篇应用CATIA软件对某机62框建模及数控加工模拟的论文。该论文介绍了数控机床的组成、工作原理以及机床的选择并且阐述了毛坯如何通过数控加工得到零件，通过CATIA软件来仿真数控加工的过程。详细介绍了加工零件的建模、工程图的生成、数控加工过程和APT语言的基本定义以及APT代码的自动生成。其中如何应用CATIA软件来实现零件的建模、零件的数控加工过程是本文的重点。 关键词：CATIA ; 数学模型; 数控; 仿真 Abstract This is a thesis about how to use CATIA software to set up models of a plane’s 62 frame and create the simulation of numerical control manufacture. It introduces the composing and working principle of numerical control machine tool, and how to choose numerical control machine tool , how the semi-finished product is processed product by the numerical control process and how to simulate numerical control manufacture process by CATIA software . Besides, the thesis talk about how to set up model、make engineering drawing、build the milling cutter stock、create the track of the milling cutter、define the language of APT and make APT 。As the emphases, the thesis discuss how to set up model of the part、create the track of the milling cutter、make the code APT by CATIA software. Keywords: CATIA; mathematical model ;numerical control ;simulation;
-
路宝车控制面罩双型腔注塑模设计_模具专业论文范文
模具专业论文范文 Abstract The mould plays a more and more important role in modern industry. According to the actual need, the mould of the face guard of lubao car has been designed in the paper. In order to satisfy the demand of the productivity of the face guard in enterprises, it adopts one pair of types to design the mould and boosts productivity. At first, the paper makes a structure analysis of the mould, then carrys on the design of pouring system ，patterns mechanism, cooling system, pulling system, mould shelf and design to guide mechanism, etc. Because products have side direction hole, it need helix pillar to realize the action. It has the advantage of simple structure, convenient to make and install. Through consulting relevant materials and scheme, the paper has proved and finished the comprehensive design of a mould organization, thus reached specifications and requirements of the design. Keywords: Helix pillar Injection mold Side core-pulling structure Pouring system 摘 要 注塑模具在现代工业中起着越来越重要的作用。结合实际需要文中对路宝车控制面罩的模具进行了设计，通过企业对路宝车控制面罩生产率的要求，采用双型腔设计模具，以便提高生产率。本文通过对塑件的结构分析，然后进行了模具的浇注系统、脱模机构、冷却系统、抽芯机构、模架和导向机构等的设计。由于产品存在侧向孔需要抽芯，而斜导柱机构可以实现侧抽动作，且结构简单，制造和安装方便，故本设计采用斜导柱顶出机构。通过查阅相关资料、方案论证完成了本模具机构的综合设计，达到了设计任务书提出的性能指标要求。 关键词：斜导柱 注塑模 抽芯机构 浇注系统 论文目录，请与本站客服联系查看。
-
赛马车A底大风扇叶单型腔注射模的设计_模具专业论文
模具专业论文范文 Abstract In this paper, A race car fan at the end of the wind of a single cavity injection mold design method and the specific design process, the plastic parts for Qi Harbin Automotive Trim Co., Ltd. plastic standard sample. Through the structural analysis of plastic parts, plastic parts using UG draw the design and application of CAD/CAM drawing the overall injection molding assembly, will be dynamic modulus maps and plans. Through theoretical calculations and materials used to determine the performance of the integrated parameters of the casting mold system, the side core pulling bodies out of the top agencies, under reduction, cooling systems, orientation, etc. and mold design. Which, due to the design of plastic parts all around with a groove, so the side core-pulling mechanism is designed to be difficult in this re-design. We analyzed the use of the oblique derivative method smoke side column, effective and reliable solution to this problem. Key words: Injection Mold；Oblique Guides；Plastic 摘 要 本文为赛马车A底大风扇叶单型腔注射模的设计方法及具体设计过程，本塑件为哈尔滨齐塑汽车饰件有限公司的标准样件。通过对塑件的结构分析，运用UG画出塑件的图样及运用CAD/CAM绘画出注射模具的整体装配图、定模图及动模图。通过理论计算及所用材料性能等综合参数确定了模具的浇注系统、侧抽芯机构、顶出机构、复位杆、冷却系统、导向机构和模架等的设计方案。其中，由于本设计中塑件的四周都带有凹槽，所以侧抽芯机构的设计是本设计的重难点。我们经分析采用了斜导柱侧抽的方法，有效可靠的解决这个问题。 关键词：注射模；斜导柱；塑料 论文目录，请与本站客服联系查看。
-
赛马车中控盒挡板双型腔注射模设计_模具专业论文范文
模具专业论文范文 目 录 摘要 I Abstract 第1章 绪 论 1 1.1 选题的依据、意义和理论或实际应用方面的价值 1 1.2 本课题在国内外的研究现状 1 1.3 课题研究的内容及拟采取的方法 2 第2章 整体方案论证 3 2.1 设计任务 3 2.2 塑件分析 3 2.2.1 塑件的外形分析 3 2.2.2 产品的结构分析 4 2.2.3 产品材料性能 5 2.3 注射机的选用· 5 2.3.1 注射机类型的选择 5 2.3.2 注射机型号的确定 6 2.3.3 校核所选注塑机的部分参数 7 2.4 本章小结 8 第3章 成型部分及其零部件的设计 9 3. 1 分型面的确定 9 3. 2 型腔数确定 9 3.3 凹模结构设计 10 3.4 型腔壁厚计算 ···· 11 3.5 凹模成型工作尺寸计算 13 3.6 凹模的材料选择及粗糙度要求 20 3.7 凸模结构设计 ·· 20 3.8 凸模成型工作尺寸计算 21 3.9 凸模的材料选择及粗糙度要求 23 3.10 成型零件脱模亵渎的确定 23 第4章 浇注系统设计· 24 4.1 主流道设计 24 4.2 分流道的设计 25 4.3 浇口的设计 25 4.4 冷料穴设计 28 第5章 排溢、引气系统设计 29 5.1 排溢系统设计 29 5.2 引气系统设计 29 第6章 温度调节系统的设计 29 6.1 冷却系统的设计要点 31 6.2 冷却装置的理论计算 31 6.3 冷却回路布置 32 6.4 冷却系统的其他零部件 32 第7章 脱模机构设计 33 7.1 脱模机构的构成与功能 33 7.2 取出机构的设计 33 7.3 脱出机构设计原则 33 7.4 动模斜滑块脱模机构设计 38 第8章 模架设计 39 8.1 标准模架的选用 39 8.2 固定板及垫板 39 8.3 支承块(垫块 40 8.4 导向零件 40 第9章 吊装设计 41 总结 42 参考文献 43 致谢 44 摘 要 本文主要对中控盒挡板双型腔注射模进行设计。主要分析了塑件外形、结构及所用的塑料性能，选择注射机并对其中的部分参数进行了校核，并确定了设计方案。在注塑模的总体结构设计基础上，用UG画出本塑件的三维实体外型，包括了浇注系统设计、成型部分及其零部件设计、排溢与引气系统设计、温度调节系统中冷却系统设计、脱模机构设计。本文着重进行了脱模机构设计，它完成成型后的塑件与模具松动、分离，主要是侧向抽芯机构及顶出机构设计。 关键词：模具；斜导柱；脱模机构；斜滑块；注塑模 ； Abstract The design process of the automobile combination instrument cover single-cavity injection mould is mainly introduced in this paper. The shape, structure of the plastic part and the performance of using plastic are firstly analyzed, and the injection machine is selected with some of its parameters being checking, and design the appearance.structure with the UG three dimensional entity designing, determining the design proposal. Then the overall structure of the injection mould is designed, including the pouring system design, the formation part and its components design, the overflow and bleed system design, the cooling system of temperature adjusted system design, demould mechanism design. The demould mechanism design is emphatically introduced in the paper, which accomplish the plastic part isolating from the mould, the side-extracting core mechanism design and the ejecting mechanism design being two emphasizes. Keywords: Injection mould Pouring system Cooling system Side-extracting core mechanism Ejecting mechanism
-
赛马汽车烟灰缸盖双型腔注射模_模具专业论文范文
模具专业论文范文 Abstract This paper introduces race car ashtray covered plastic injection mold design process. Ashtray covered by the analysis of the program completed the design of mold, including the choice of sub-shot machine, determine the location of surface, to determine the number of cavity, the choice of gate. Detailed design of the mold pieces of molding, Plastic extrusion bodies, the side core pulling bodies, cast system and cooling system, core and core-pulling, as well as the form of the choice of mold, and the main parts, such as cavity size, convexity Die size for the intensity calibration. Among them, the side core pulling, as well as core pulling the slider design of the difficult times. Ashtray cover as a result of the two side holes, the general release core can not be completed, which requires calculation of the side core-pulling mechanism, side draw and the slider guide the design of columns is one of the focus; ashtray baffle the back cover impede the normal release, so the use of a sliding core, it will resolve the release of the obstruction, and can top out of plastic parts. Calculated through the mechanical analysis and oblique derivative such as columns and the size of the slider to solve the difficulties of this design. Key words: Design of plastic injecting mould ；Surface; Core 摘 要 本文主要介绍了塑料赛马汽车烟灰缸盖注射模的设计过程。通过对烟灰缸盖的分析，完成了模具的方案设计，包括分射机的选择、型面的位置确定、型腔数的确定、浇口的选择等。详细地设计了模具的成型件、塑件脱出机构、侧抽芯机构、浇注系统和冷却系统、型芯和抽芯的形式以及模架的选择等，并对主要零件,比如型腔尺寸，凸凹模尺寸等进行了强度校核。其中，侧抽芯以及滑块抽芯是本次设计的难点。由于烟灰缸盖的两个侧孔，普通型芯无法完成脱模，这就需要计算侧抽芯机构，侧抽的导柱及滑块的设计是其中的重点；烟灰缸盖的背面有挡板阻碍正常脱模，因此采用滑动型芯，既可解决脱模的阻碍，又可以将塑件顶出。通过受力分析及计算得到斜导柱及滑块等的尺寸，解决本次设计的难点。 关键词：塑料注射模；分型面；型芯 论文目录，请与本站客服联系查看。
-
哈飞路宝空调控制饰板单型腔注塑模设计_模具专业论文
模具专业论文范文 Abstract This paper mainly introduce the development of mould in our country and foreign countries, structure of parts of mould ,and design process of function system .Including process of air ejection system, ejection mould system, structure of slanting pillar ,assemble system ,cooling system. Because of plastic product special figure, the mould use sub-type tamp-pillar pumping core institution ,which increases the complexity of the structure .The forming of the hole on beside parts use crippling mould and concave mould ,which cleverly solves the problem of side core pulling. Key words: injectiong mold pouring system dividing surface helix-pillar 摘 要 本文主要介绍了当前国内外模具发展现状，以及模具零部件结构与功能系统设计。主要包括成型零部件的设计、浇注系统设计、排气系统设计、脱模机构设计、侧向抽芯机构设计、合模导向机构设计、冷却系统设计。 由于塑件特殊结构，为便于脱模，设计中采用拉钩式顺序分型机构和斜导柱抽芯机构，加大了模具结构复杂程度。塑件上部分孔的成型采用凸、凹模组合成型巧妙解决了侧抽芯问题。 关键词：注塑模；浇注系统；分型面；斜导柱 论文目录，请与本站客服联系查看。
-
赛豹车A底大风扇叶单型腔注塑模设计_模具专业论文
模具专业论文范文 Abstract With the development of the plastic industry, the plastic injecting mold has already become one of the mainly ways of making the plastic ware. This paper mainly introduces the method and the process of the injecting mold designing. First, It has introduced the position and function in the developing society of the plastic injecting mold’s making and designing, and analysied the structure of the plastic product ,and also modified some parts of the structure .Next, this paper introduce the concrete process of the plastic mold’s designing. according to the actual designing plastic, carried on the analysis and modifications of the plastic product’s structure craft, the next chapter introduced the concrete design process of the plastic injecting mold.The injecting machine was chosen according to the product’s weight,the face was chosen according to the structure of the plastics and model the type of cent of the craft、taking out the organization of core and the outing organizations、noting system、cooling system and resetting the system to carry on the detailed design towards modeling zero parts and sprinkling at the same time。In addition, return to design of plastics injected other zero parts of mold to carry on the simple design, the insight was elaborating in the end of the paper, and the later designing way of the injecting mold was put forward my views and viewpoints. Key words: injecting mold design；mold；plastic 摘 要 随着塑料工业的发展，塑料注射模已经成为制造塑料制品的主要手段之一。本文主要介绍了塑料注射模设计的方法及过程。首先，介绍了塑料注射模设计与制造在社会发展过程中所处的地位和作用，并对塑料制品（汽车风扇叶）的结构进行了分析和适当的修改，然后介绍了塑料注射模具的具体设计过程。具体设计内容包括：注射机型号的选择、分型面的确定、抽芯机构及顶出机构设计、成型零部件的设计、浇注系统、冷却系统和复位系统的设计，此外，还对塑料注射模其他零部件进行了简单的设计。最后阐述了完成此次设计之后的心得，并对以后的模具设计思路提出了自己的见解和看法。 关键词：注射模设计；模具；塑料 论文目录，请与本站客服联系查看。
-
水管挤出模模具设计_模具专业论文范文
模具专业论文范文 绪论………………………………………………………1 来源背景…………………………………………1 目的……………………………………………………1 要求…………………………………………………1 实际意义………………………………………….2 主要设计内容………………………………….2 原始资料…………………………………………….2. 塑料制品产量和生产要求…………………………2 塑料品种牌号……………………………………2 制品图样………………………………………….3 2.3.1具体尺寸及要求如图2.1…………………….3 2.3.2根据制品尺寸几何形状进行分析……………….3 2.3.2.1 尺寸及公差………………………………..3 塑料制品的形状…………………………….4 塑料制品的壁厚……………………………..4 3 模具结构设计…………………………………………..4 3.1 管材挤出机头结构形式的确定。…………………4 3.2机头设计……………………………………………4 ①口模—成型制品外表面的设计……………………..4 ②芯模-成型内表面的设计…………………………..6 ③分流器……………………………………………..7 ④分流器支架…………………………………………8 ⑤定径套………………………………………………8 4 紧固件及其他附件……………………………….9 5 加热系统…………………………………………9 非标准件加工工艺…………………………………..9 分流器工艺规程设计…………………………………9 口模工艺规程设计………………………………………12 芯模工艺规程设计………………………………………..14 机体工艺规程设计………………………………………….18 栅板工艺规程设计………………………………………….22 结束语………………………………………………………….25 参考文献…………………………………………………..25 摘要：《水管（SMBS – 05）挤出模》是编写者三个月以来所编写的毕业设计说明书。主要介绍：挤出模的整个过程，包括芯模、口模、分流锥等一些设计。在论文书写过程中，通过一个月的时间对原始资料进行搜集，充分考虑模具的各种结构并和指导老师及同学之间进行讨论，最终选择了论文所写的模具结构。 本论文的资料大多是编写者结合三年所学的各方面的理论知识完成的，包括机械制图、公差与配合、工程力学、机械设计、注射模具成型、工程材料等；一部分是通过查手册所得；还有少部分是同学之间的交流和自己三年的实习总结。 关键词：芯模、口模、分流锥、
-
锐意车左后视镜盖单型腔注射模设计_模具专业论文
模具专业论文范文 Abstract The graduation project is the determination of the issues covered car rearview mirror mold design. Haqisuo from Plastic Automotive Trim Co., Ltd.. Internship in the factory process, the understanding of the processing tool, recognizing the importance of mold industry. This paper mainly introduces the car left the rearview mirror is determined to single-cavity injection mold design method and process. The main surface through a single injection, according to the design of product characteristics of convex and concave mold, injection molding machine to choose models to determine the overall structural design, focusing on the design of the oblique derivative of the bending force calculation column to facilitate product release. Assembly through the CAD drawing.This article is divided into three parts, in the first part, introduced the injection mold industry in the modern situation and the purpose and significance of topics. The second part of the show is the root of the characteristics of products, select the type used in injection molding machine, the determination of surface, mold design and structure of the program choice. The third part is the main part of die design, and its specific content, including: forming part of the design calculation, design of gating system, overflow row air-system design, cooling system design, design agencies, as well as Demoulding reset system design, also designed a number of other parts. Key words: mold； injection mold； casting systems； Demoulding 摘 要 本次毕业设计的课题是锐意汽车后视镜盖的模具设计。来源于哈齐塑汽车饰件有限公司。在工厂实习过程中，了解了模具的加工生产，认识到模具行业的重要性。本文主要介绍了锐意车左后视镜单型腔注塑模设计的方法及过程。主要通过单分型面注塑，根据产品特性设计凸凹模，选择注塑机型号，确定总体结构设计，着重设计了斜导柱的弯曲力计算，方便产品脱模。通过CAD绘制装配图。本文分为三部分，在第一部分，介绍了注塑模在现代工业的发展状况和选题的目的和意义。第二部分的内容是根椐对产品的特征，选择所用注塑机型号、分型面的确定、模具的设计和结构方案的选择。第三部分是本次模具设计的主要部分，其具体的内容包括：成型部分的设计计算、浇注系统的设计、排溢引气系统设计、冷却系统的设计、脱模机构的设计以及复位系统的设计，另外还设计一些其它的零部件。 关键词：模具； 注塑模； 浇注系统； 脱模 论文目录，请与本站客服联系查看。
